The buckle on its own. Kore designs its X-Series buckles for its 1.5″ EDC gun belt straps, so any buckle here fits a Kore 1.5″ EDC strap you already own — swap it in with the included hardware and the belt reads completely differently.
Why buy a gun belt buckle separately
Two reasons, and both are practical. The first is wardrobe: one strap and two buckles covers a suit and a range day without buying a second belt. The second is cost — replacing a buckle is far cheaper than replacing a belt that is otherwise fine.
How the ratchet buckle works
The buckle uses Kore’s micro-adjustable ratcheting system: paired with a compatible Kore belt strap, it gives 40+ sizing positions in quarter-inch increments, where a punched belt only moves from hole to hole. That is what lets you tighten a quarter inch when you hang a holster on the belt and let it back out when you sit down.
How to swap the buckle
Keith, maker of the Cloudster Pillow, on how he swaps a buckle on a Kore belt:
- Use the supplied Allen wrench to loosen the two screws.
- Pull the latching mechanism open and slide the buckle off.
- Slide the new buckle on and close the latch. Its teeth bite into the belt for a secure install.
- Tighten the two screws with the supplied Allen wrench.
“The entire process of removing the buckle and installing the new buckle can be done in less than 2 minutes. It’s very easy.”
Which belts this buckle fits
Kore designs the X-Series buckle for its 1.5″ EDC gun belt straps: tactical nylon, full grain leather, buffalo leather, Armortek Leather™ and Executive Protection. Kore lists it as not compatible with its Q Series, Ranch Series, Competition, Garrison, Battle, Duty or non-gun belt systems. Check which Kore strap you have before ordering. If you have a Kore 1.5″ EDC gun belt strap, this is the buckle.
Specifications
- Fits: Kore 1.5″ EDC gun belt straps, including tactical nylon, full grain leather, buffalo leather, Armortek Leather™ and Executive Protection. Kore lists it as not compatible with Q Series, Ranch Series, Competition, Garrison, Battle, Duty or non-gun belt systems.
- Buckles: 14 (X1 to X12; X6 and X8 come in two finishes), in gunmetal, black, nickel, brass and stainless steel. Kore lists the X3 as gunmetal and nickel-free, and notes that the X3, X8 and X9 have a faux post that can leave cosmetic marks on leather straps.
- Fitting: screws and hardware included
- Adjustment: quarter-inch ratchet, 40+ positions
- Warranty: Kore gives it a one-year manufacturer’s warranty; warranty claims go to Kore directly.
Need the strap too? The full belts are in Kore gun belts 1.5″ — leather that wears with a suit, or tactical nylon. Sizing help: the Kore belt sizing guide.












