Kore Ratchet Gun Belts for Concealed Carry (1.5″)
What is a ratchet gun belt? A ratchet gun belt has no holes. A toothed track inside the strap locks into the buckle in quarter-inch steps, with over 40 sizing positions, so you can tighten a little when the holster goes on and let it out when you sit down. Kore, which makes every belt on this page, says its “micro-adjustable track delivers a precise, secure fit in ¼" increments”, with 40+ sizing positions.
What is a concealed carry belt? A concealed carry belt (also called a CCW belt or gun belt) is a stiffened belt built to carry a holstered firearm; on Kore's belts, a reinforced Power-Core™ center adds stiffness and support. Every belt here is a Kore 1.5″ ratchet gun belt with a reinforced core, cut to size, in tactical nylon, buffalo leather, ArmorTek leather, basketweave or carbon fiber, from $59.95. Kore rates the tactical nylon belts for loads up to 10 lbs and the buffalo leather, ArmorTek, basketweave and carbon fiber belts for up to 6 lbs; the table below gives each family’s rating, width, buckle options and size range.
- US-Made Webbing on USA Tactical Nylon
- 1.5″ EDC / CCW
- Micro-Adjust Fit
- Reinforced Tactical Support
Kore 1.5″ ratchet gun belts for everyday concealed carry. No holes: the track adjusts in quarter-inch steps, and each belt is cut to your size.
Start here — pick your belt type
Also: duty, patrol, battle, garrison and competition belts
Kore Gun Belts
Kore Gun Belts
Kore Gun Belts
Kore Gun Belts
Kore Gun Belts
Kore Gun Belts
Kore Gun Belts
Kore Gun Belts
Kore Gun Belts
Kore Gun Belts
Kore Gun Belts
Kore Gun Belts
Kore Gun Belts
Kore Gun Belts
Kore Gun Belts
Kore Gun Belts
Kore Gun Belts
Kore Gun Belts
Kore Gun Belts
Kore Gun Belts
Kore Gun Belts
Choose your buckle
Every belt comes with the buckle you choose; you pick it on the belt page with these photos (the belt’s price updates for the X4 Stainless Steel). 14 X-Series buckles in five finishes: gunmetal, black, nickel, brass and stainless steel. Buckle choices vary by belt, and each belt page lists its own.
X1 Gunmetal
X2 Gunmetal
X3 Gunmetal
X4 Stainless Steel
X5 Black
X6 Black
X6 Gunmetal
X7 Black
X8 Brass
X8 Nickel
X9 Nickel
X10 Black
X11 Black
X12 Black
Already own a Kore belt and want a second buckle? Replacement buckle (buckle only) →
Cloudster Pillow carries Kore 1.5″ gun belts in tactical nylon, buffalo leather, ArmorTek, basketweave and carbon fiber, built for everyday concealed carry, range work, and hard daily use. Each belt pairs Kore’s reinforced Power-Core™ center, which adds stiffness and support, with Kore’s micro-adjustable track for a precise, secure fit.
Kore says its USA tactical nylon belts feature US-made nylon webbing. Keith’s own belts: “Tactical nylon every day and at the range; ArmorTek when I want leather.” The belt carries the holster all day; the Cloudster Pillow holster wedge sits between your body and the holster and molds and contours to your body.
Built Around US-Made Nylon Webbing
Kore says its USA tactical nylon belts are manufactured in the USA with US and imported materials and feature US-made nylon webbing, while a reinforced Power-Core™ center provides added stiffness and support. Kore’s micro-adjustable track delivers a precise, secure fit in ¼″ increments.
Buffalo Leather, ArmorTek & Specialty Belts
The dress side of the Kore lineup: buffalo leather gun belts in brown, black, tan, and coffee, plus ArmorTek Leather™, a manmade super-fiber with the premium look and feel of traditional leather and 2X the durability, in Kore’s words. Rounding out the line: a basketweave belt built on ArmorTek leather and Kore’s Carbon Fiber belt, 24″–54″ in a single strap.
Every one uses Kore’s adjustable track (40+ positions in ¼″ increments) and a Power-Core™ center for added stiffness and support, rated up to 6 lbs, in a belt that passes at the office or with jeans. Each is cut-to-size: trim the strap to your measurement and attach the buckle with the included hardware. Select styles are also stocked in XL (fits 44″–54″). Belts custom-cut to size are final sale. Once a belt has been trimmed to fit, it cannot be returned or exchanged. Please measure carefully before cutting.
Kore Gun Belts Compared
| Belt | Material (per Kore) | Width | Buckle | Load rating (Kore) | Size range (Kore) | Price |
|---|---|---|---|---|---|---|
| Tactical nylon (5 colors) | Nylon, Super Fiber inner | 1.5″ (5 mm) | Ratchet; 14 X-Series buckles | Up to 10 lbs | 24″–54″ | $69.95–$79.95 |
| Camo tactical nylon (6 patterns) | Nylon, Super Fiber inner | 1.5″ (5 mm) | Ratchet; 14 X-Series buckles (13 on Desert Digital) | Up to 10 lbs | 24″–54″ | $69.95–$79.95 |
| Buffalo leather (4 colors) | Uncoated buffalo leather, Super Fiber inner | 1.5″ (5 mm) | Ratchet; 14 X-Series buckles | Up to 6 lbs | 24″–44″ | $69.95–$79.95 |
| ArmorTek (3 colors) | ArmorTek Leather™, a manmade super-fiber (Kore: the look and feel of traditional leather with 2X the durability) | 1.5″ (5 mm) | Ratchet; 14 X-Series buckles | Up to 6 lbs | 24″–44″ (XL 44″–54″) | $59.95–$69.95 |
| Basketweave | Basketweave ArmorTek Leather™, Super Fiber inner | 1.5″ (5 mm) | Ratchet; 14 X-Series buckles | Up to 6 lbs | 24″–44″ | $59.95–$69.95 |
| Carbon Fiber | Carbon Fiber, Super Fiber inner | 1.5″ (5 mm) | Ratchet; 14 X-Series buckles | Up to 6 lbs | 24″–54″ | $59.95–$69.95 |
| Western (4 colors) | Buffalo leather | 1.5″ (5 mm) | Ratchet; antique silver bison buckle | Up to 6 lbs | 24″–44″ | $79.95 |
Prices from each belt’s listing on this site; materials, load ratings and size ranges from Kore’s own product pages. Read November 5, 2026. Prices include the buckle.
Kore Belt Deal: buy any Kore belt and get 25% off every mag carrier, applied automatically.
What Makes a Good Concealed Carry Belt?
A real concealed carry belt does one job a fashion belt can’t: it carries the weight of a loaded holster without sagging, rolling, or letting your grip flop away from your body. Your ideal belt also depends on your build and wardrobe — see our guide to choosing a belt for your body type and outfit.
Three things separate a true concealed carry belt from a regular one:
Rigidity — Kore’s reinforced Power-Core™ center adds stiffness and support.
Repeatable, dialed-in fit — Kore’s ratchet track gives 40+ positions in ¼″ increments, so you can tighten a quarter-inch when you add a holster and mag.
Carry-correct 1.5″ width — Rifle Configurator notes that most IWB holsters use clips designed for 1.5″ belts.
Every Kore belt below — nylon or leather — is built on that platform, which is why we recommend it as a concealed carry belt for serious EDC. Not sure on width or stiffness? The EDC Belt Guide walks through how to choose, and ratchet vs traditional belts covers why the buckle matters. For setup and sizing on a no-holes belt, see the Kore belt guide, and our belt buying guide. Prefer a specific material? Shop tactical nylon gun belts or leather gun belts.
How Stiff Should a Gun Belt Be?
Rifle Configurator's test is simple: hold the belt by one end, horizontally. A good gun belt extends 8 to 12 inches before it droops. Heavier setups put more load on the belt: Rifle Configurator puts a Glock 19 with a tactical light at more than 30 ounces in total. Kore rates its tactical nylon belts for loads up to 10 pounds, the highest rating in the table above, and states that its leather and ArmorTek belts are less stiff than nylon.
Ratchet, Cobra or Holes: Choosing a Buckle
Outdoor Life's buyer's guide frames the choice as how the belt closes: a buckle that fits into a hole, a ratchet system that latches inside the buckle, or Velcro. A ratchet belt gives quarter-inch micro-adjustments, so you can loosen or tighten after a meal or a change of clothes without taking the belt off. Rifle Configurator describes cobra buckles as offering instant on and off by squeezing both sides, while it credits ratchet belts with comfort adjustment. Houdini Holsters also notes that bulky tactical buckles can print under clothing or dig into the stomach when seated, while ratchet belts use slim buckles that avoid that problem. On a Kore belt, the running end pushes through the buckle, a tab inside the buckle locks onto tracks built into the strap, and a lever on the bottom of the buckle releases it.
How to Size and Cut Your Kore Belt
Kore’s own instructions for its 1.5″ gun belts start like this (quoted exactly from Kore’s sizing page, read November 5, 2026):
- “On the back of the belt, use the ruler markings to find your pant size.”
- “Add 4" for OWB carry, or 6" for IWB carry to your pant size. Cut at the appropriate mark using a sharp pair of scissors.”
Kore’s example: “Example: If your pant size is 34", cut the belt at the 38" mark for OWB carry, or the 40" mark for IWB carry.” And: “IMPORTANT: If your pant size is close to the maximum size marking, DO NOT CUT. Try the belt on first, then trim accordingly.”
Belts custom-cut to size are final sale: once a belt has been trimmed to fit, it cannot be returned or exchanged. Kore’s full five steps, including attaching the buckle, are in our Kore belt sizing guide.
Kore Gun Belt FAQ
Are these Kore gun belts made in the USA?
Kore says its USA tactical nylon gun belts are manufactured in the USA with US and imported materials and use US-made nylon webbing. Kore says its Multicam® and desert pattern belt straps are manufactured in the USA with U.S. and non-U.S. parts. Kore’s pages for the buffalo leather, ArmorTek, basketweave and carbon fiber belts do not say where they are made.
Are these belts okay for concealed carry?
Yes. Kore rates its 1.5″ tactical nylon belts for up to 10 lbs and its buffalo leather, ArmorTek, basketweave and carbon fiber belts for up to 6 lbs, for IWB, OWB or appendix carry, and each has a Power-Core™ center for added stiffness and support.
How does the micro-adjust fit work?
Kore’s track adjusts in ¼″ increments, with 40+ sizing positions. You can tighten or loosen on the fly without punching new holes.
Do the leather and specialty belts use the same ratchet system?
Yes. Kore lists 40+ positions in ¼″ increments on every belt here, and each strap works with Kore 1.5″ EDC buckles. The leather and specialty straps are cut-to-size just like the nylon, and select styles are stocked in XL (44″–54″).
Will this pair with a Cloudster Pillow holster wedge?
Yes. The belt carries the holster all day; the Cloudster Pillow holster wedge sits between your body and the holster and molds and contours to your body.
These are ratchet belts
Every belt here runs Kore’s ratchet track instead of holes: the buckle engages a toothed strip inside the strap and adjusts in quarter-inch increments, giving over 40 sizing positions, where a punched belt only moves from hole to hole. You tighten a quarter inch when you add a holster and let it out when you sit down. There are no holes to stretch out and no half-sizes to live with.
The buffalo leather and ArmorTek models are the dress side of the line: Kore describes ArmorTek as having the premium look and feel of traditional leather. Both have Kore’s Power-Core™ center for added stiffness and support. That is the whole point of a ratchet gun belt: it disappears into the outfit and still does the work.
Is a CCW belt different from a normal belt?
Yes, and the difference is inside the strap. Rifle Configurator notes that a good gun belt held by one end extends 8 to 12 inches before it droops, while a regular dress belt droops immediately. On Kore’s belts, the Power-Core™ center adds stiffness and support.
What width should an EDC belt be?
Rifle Configurator notes that most IWB holsters use clips designed for 1.5″ belts, and that 1.75-inch belts may not fit through dress pants belt loops. Every belt on this page is 1.5″ wide.
How is a ratchet belt better for concealed carry?
A hole-punched belt only moves from hole to hole, which can leave you choosing between too loose and too tight. The ratchet track adjusts in quarter-inch increments — over 40 positions — so you can tighten when you put the holster on, loosen a notch when you sit in the car, and tighten back after. Under a loaded belt that difference is the whole day.
Can an EDC gun belt look formal?
The buffalo leather and ArmorTek models do. Kore describes ArmorTek as having the premium look and feel of traditional leather.
Can I return a Kore belt after I cut it?
No. Belts custom-cut to size are final sale: once a belt has been trimmed to fit, it cannot be returned or exchanged. Uncut belts have free 30-day returns. Measure carefully before you cut, using our Kore belt sizing guide.
Can I use a Kore belt for appendix carry?
Yes. The tactical nylon, buffalo leather, ArmorTek, basketweave and carbon fiber belt pages each rate the belt for IWB, OWB or appendix carry.
Is a stiff gun belt uncomfortable?
Rifle Configurator says a proper gun belt distributes weight across your waist instead of concentrating it at one point, and keeps the holster locked in position.
Will a 1.5-inch belt fit my belt loops?
Kore's 1.5-inch EDC belts are 5 mm thick and will fit through most standard belt loops. Kore notes that many standard belt loops will not fit a 1.75-inch belt, so the 1.5-inch width is the one to choose for everyday pants.
Does leather stretch?
Kore’s buffalo leather and ArmorTek belts use the same adjustable track as its nylon belts: 40+ positions in ¼″ increments, so you adjust in quarter-inch steps rather than hole to hole. Kore describes ArmorTek as a manmade super-fiber with increased durability, stretch and recovery properties.

















