✅ 30-Day Returns
🔒 Secure Checkout
🇺🇸 USA Made
⭐ 355+ Reviews
Holster Comparisons, Holster Wedge

Cloudster Pillow + Werkz Holsters: Custom Kydex Comfort Setup

Posted on by cloudster
Best holster wedges 2026 comparison - Cloudster Pillow holster wedge

If you carry a Werkz custom Kydex holster — the M6, M3, or one of their light-bearing builds — you’ve already invested in some of the best small-shop Kydex available. Werkz hand-builds each holster to fit specific pistol + light + optic combinations, but they don’t build comfort wedges into their lineup. That’s where the Cloudster Pillow comes in: it drops onto every Werkz holster and turns a precision Kydex shell into an all-day rig.

Does the Cloudster Pillow Fit Werkz Holsters?

Yes — every Werkz IWB and AIWB Kydex holster. That includes the Werkz M6, M3, M4, M5, and the Origin and Tucker series. Werkz’s signature flat-back Kydex panel is exactly the surface the Cloudster Pillow’s hook-and-loop attachment was designed for.

Because Werkz holsters typically don’t ship with a comfort wedge, the Cloudster Pillow includes everything you need on first install: the pillow itself, two industrial-grade loop strips, and extra shredded foam fill for fine-tuning.

Which Cloudster Pillow Size Works Best With Werkz?

Werkz Holster Recommended Size Why
M3 / M6 — compact pistol (CZ P-10C, G19, Hellcat) Standard The most common Werkz pairing — Standard fits the body-side panel cleanly.
M3 / M6 — compact + weapon light (TLR-7 HL-X, X300U) Deluxe Light extends the muzzle outboard — Deluxe gives more wedge surface below the bezel.
M3 / M6 — full-size (G17, P320 X-Compact, Staccato) Deluxe Heavier pistol, longer slide — Deluxe gives the support and rotation you need.
Origin / Tucker — IWB (4 o’clock carry) Standard Strong-side IWB needs less aggressive grip rotation than AIWB — Standard hits the comfort sweet spot.

Why Werkz Customers Add Cloudster Pillow

Werkz makes premium custom Kydex. The Kydex shell is dialed in for your specific pistol, but the comfort layer is the customer’s job:

  • No comfort wedge included. Most Werkz holsters ship as bare Kydex. You’re paying for precision fit and quality molding — comfort accessories are sourced separately.
  • Hand-built holsters fit tight against the body. That’s a feature for concealment, but for AIWB carry it can amplify muzzle pressure on the lower abdomen. A wedge at the muzzle pushes the holster off your skin and rotates the grip in.
  • Light-bearing Werkz builds amplify the muzzle dig issue. A weapon light extends the holster’s profile — without a wedge, that extension digs harder. The Cloudster Pillow Deluxe is the right size for these setups.
  • Bare Kydex on bare skin in summer. Customers consistently mention the bamboo and cotton covers as the difference-maker for summer carry. The fabric layer wicks moisture and prevents the sticky-then-chafe cycle.

How to Install the Cloudster Pillow on a Werkz Holster

  1. Wipe the body-side Kydex with rubbing alcohol. Werkz’s Kydex finish is smooth — alcohol prep ensures the adhesive bonds cleanly.
  2. Apply the loop strip. Stick one of the included industrial-grade loop strips to the lower third of the body-facing panel. On a light-bearing Werkz, position below where the light bezel ends.
  3. Press the Cloudster Pillow on. Position with the thickest part nearest the muzzle. Press firmly for 30 seconds.
  4. Holster up and check fit. A Werkz holster fits tight to your pistol — the wedge should now sit between you and the holster, with the grip noticeably rotated inward.
  5. Move and assess. Sit in your car, lean over a sink, walk a flight of stairs. Pay attention to where pressure builds.
  6. Tune the fill. Werkz’s tight molding means you have less margin for error in wedge fill. Start with the factory fill, add if you want more grip rotation.

What Werkz Customers Are Saying

“Love my Cloudster Pillow! I can wear my CZ P-10C in my Werkz M6 holster all day! Thank you for blessing us appendix carriers with such a great product!”
— Jason D. — North Little Rock, AR

“Great product! Love it. Springfield Hellcat Pro… cerakoted in USMC Red & Graphite Black. It has an upgraded Apex Trigger, EPS Carry Sight and a Streamlight TLR-7 HL-X light. I carry this in my Werkz.”
— Mark G. — Los Angeles, CA

“Game Changer for Concealed Carry. This product is an absolute game changer for concealed carry. Before getting the Cloudster Pillows, I used T1C. T1C’s wedges were more comfortable off than on. When I got the Cloudster Pillow, I had high expectations…”
— Eric — Hillsborough, NJ

Frequently Asked Questions

Does the Cloudster Pillow fit the Werkz M6 with a Streamlight TLR-7?

Yes. The Werkz M6 with TLR-7 is one of the most common pairings — Standard or Deluxe both work. Deluxe gives more rotation and is the safer pick for full-size frames or bigger body builds.

Will the Cloudster Pillow fit a Werkz holster built for a custom Cerakote pistol?

The Cloudster Pillow attaches to the holster, not the pistol. Custom finishes don’t change holster compatibility — if it’s a Werkz Kydex holster with a flat-back panel, it’s compatible.

Is one Cloudster Pillow enough for a CZ P-10C in a Werkz M6?

Yes. Standard size is the most common pick. Many customers buy one for their primary holster, then a second when they pick up another setup — but a single Standard handles the typical Werkz M6 + compact pistol setup.

Can I use the Cloudster Pillow with a Werkz Tucker (IWB) and a Werkz M6 (AIWB)?

Yes. The pillow itself is repositionable — peel off one holster, press onto another. Cloudster ships with two loop strips so you can keep one bonded to each holster and just swap the pillow.

Will the Cloudster Pillow scratch the Cerakoted finish on my Werkz holster?

No. The pillow’s contact surface is fabric, and the loop strip’s adhesive is non-residue removable. Cerakote is also extremely scratch-resistant — the only real risk to a Cerakote finish is a knife edge or screw thread, neither of which is present in the Cloudster system.

Related Guides

cloudster