Holster Comparisons, Holster Wedge Guides

Cloudster Pillow + Crossbreed Holsters: SuperTuck & Rogue Setup

Posted on by Cloudster Pillow
Cloudster Pillow Crossbreed

Quick answer: Yes, the Cloudster Pillow works with CrossBreed’s Rogue; one of our customers runs it on a Rogue with a Hellcat Pro. It attaches with hook-and-loop to the body side of the holster, low toward the muzzle. CrossBreed also sells its own Concealment Wedge (a dense foam core with a Lycra exterior, two sizes in the pack) and a polyester Comfort Backer. CrossBreed’s wedge is fixed and fabric-covered, with two stack heights. With the Cloudster Pillow holster wedge you set the thickness yourself with shredded cooling-gel memory foam. For a Glock 19, the Deluxe or the Monster.

Cloudster Pillow Crossbreed
A white Cloudster Pillow holster wedge installed on a sidecar rig — mag carrier, red-dot pistol, and the wedge cushioning the muzzle end.

Does the Cloudster Pillow Fit CrossBreed Holsters?

On the Rogue, yes. CrossBreed’s Rogue has a detachable magazine carrier and a concealment claw, and the pillow mounts with hook-and-loop on the side that faces your body. Loop strips and an alcohol wipe come with the pillow, so you have what you need for the first install. Tony D. runs his on a Rogue with a Hellcat Pro (see his review below).

The SuperTuck and MiniTuck are hybrids with a leather backing and a Kydex pocket, made for carry at 3:30 to 5 o’clock, and the leather is the side against your body. The Cloudster Pillow works on those too; it goes on any holster, whatever the material. Adhesive Velcro can hold less well on leather, so on a hybrid you can make it semi-permanent: put small spots of glue at the corners and center of the adhesive Velcro strip, or lightly sand the spot where the strip goes with very fine-grit sandpaper first. Both change the holster, so check the holster maker’s warranty before you do either.

Cloudster Pillow vs. the CrossBreed Concealment Wedge and Comfort Backers

CrossBreed sells three add-ons for the body side of its holsters: the Concealment Wedge, the Comfort Backer and the MultiFlex Comfort Backer. The Cloudster Pillow is one soft, adjustable wedge for both comfort and concealment, and it goes on CrossBreed holsters that CrossBreed’s own add-ons do not list, such as the SuperTuck. I have used all the other brands. The Cloudster Pillow is superior to other brands, and here is why.

What CrossBreed’s add-ons are

The Concealment Wedge is “Constructed with a durable Lycra® exterior and dense foam core.” The pack has two wedges: a small blue wedge at about ½″ and a large black wedge at about ¾″ of stack height when applied. It mounts to the bottom of the holster with hook-and-loop, includes an alcohol wipe pad, and is listed for the Xecutive, Mini-Xecutive, Rogue, LightGuard, A.R.M.O.R. and MultiFlex. The Comfort Backer is “Crafted from polyester” and listed for the LightGuard, A.R.M.O.R. and Xecutive. The MultiFlex Comfort Backer is neoprene, is “for IWB use”, and is fitted by removing four screws and a binding post, installing the backer, then replacing the hardware.

Where the Cloudster Pillow is different

The fill is shredded cooling gel memory foam in a soft fabric cover, not a dense foam core, and you add or remove fill to set the thickness instead of choosing between two stack heights. It comes in four sizes, Mini, Standard, Deluxe and Monster, with a bamboo cover on the White, a cotton blend on the Dark and 100% cotton on the Camo. It mounts to any IWB or AIWB holster with the included Velcro strips: peel, stick one side to the holster, press the pillow on. No screws to remove. It is made in the USA and backed by a lifetime warranty, with free 30-day returns.

CrossBreed Concealment Wedge CrossBreed Comfort Backer CrossBreed MultiFlex Comfort Backer Cloudster Pillow
What it is Wedge, “dense foam core” Backer, “Crafted from polyester” Backer, “breathable Neoprene” Pillow wedge, shredded cooling gel memory foam
Thickness Two wedges, about ½″ and ¾″ stack height Not stated on the page Not stated on the page Adjustable: add or remove fill
Cover “Lycra® exterior” Polyester Neoprene Bamboo (White), cotton blend (Dark), 100% cotton (Camo)
How it attaches Hook-and-loop to the bottom of the holster Hook Velcro on the backer, loop strip on the holster Remove four screws and a binding post, fit the backer, replace them Peel-and-stick Velcro strips, included
Holsters listed Xecutive, Mini-Xecutive, Rogue, LightGuard, A.R.M.O.R., MultiFlex LightGuard, A.R.M.O.R., Xecutive MultiFlex, IWB use Any IWB or AIWB holster
Made in Not stated on the page Not stated on the page Not stated on the page USA
Warranty and returns Not stated on the page Not stated on the page Not stated on the page Lifetime warranty, free 30-day returns

For the full side-by-side against other wedge makers, see the 2026 holster wedge comparison.

Which Cloudster Pillow Size for a CrossBreed Holster?

Your setup Size
Rogue with the mag carrier attached (sidecar) Deluxe or Monster
Glock 19 Deluxe or Monster
Sig P365 (no light) Standard or Deluxe
Other micro and subcompact 9mms (Hellcat, Hellcat Pro, Glock 43/43X, Shield, P365X) Standard or Deluxe
Full-size (Glock 17, P320 Full Size, M&P) Deluxe or Monster
Any gun with a weapon light Deluxe or Monster

Shop the sizes in this table:

The choice between the two sizes is yours. For larger body frames we recommend sizing up: a larger pillow can always be made to feel smaller by taking some fill out, but a smaller pillow can’t be made to feel bigger. Not sure? Tell us your gun, holster and carry position and we’ll help you compare the two.

You can also use our size finder.

How to Install a Cloudster Pillow on a CrossBreed Holster

  1. Unload and remove the gun from the holster.
  2. Take off any CrossBreed wedge that’s on the holster now.
  3. Clean the body side of the holster with the included alcohol wipe and let it dry.
  4. Stick the loop strip on the body side, starting low toward the muzzle end; adjust to taste, since there is no fixed spot.
  5. Press the pillow on, thicker part toward the muzzle. Our adhesive reaches full strength after 24 hours, so give it a day before heavy use if you can.
  6. Wear it and check standing, sitting and bending. The grip should tuck in, and the holster’s bottom edge should be cushioned instead of pressing into you.
  7. Tune the fill. More fill tips the grip in further; less fill is subtler. If it pokes when you sit, move it up toward the trigger guard. Our wedge placement guide has the details.

What CrossBreed Customers Are Saying

“OMG is this pillow comfortable! Crossbreed Rogue System — Hellcat Pro. These are amazing! It replaced my foam wedges and I can’t believe the difference in comfort.”
— Tony D. — Lathrop, CA

Frequently Asked Questions

Does CrossBreed make a holster wedge?

Yes: the CrossBreed Concealment Wedge, a dense foam core with a Lycra exterior. The pack has two wedges, about ½″ and ¾″ stack height, and mounts with hook-and-loop. CrossBreed also sells a polyester Comfort Backer.

What size Cloudster Pillow for a CrossBreed Rogue?

The Deluxe or the Monster with the mag carrier attached. Run gun-only, size it by your gun: the Standard or the Deluxe for a Hellcat Pro, the Deluxe or the Monster for a Glock 19.

Can I use the Rogue’s concealment claw and the Cloudster Pillow together?

Yes. CrossBreed recommends pairing its own wedge with the Rogue’s concealment claw. Adjust one at a time so you can tell what each does.

Does it work on a SuperTuck or MiniTuck?

Yes. The Cloudster Pillow goes on any holster, including leather and hybrids. Adhesive Velcro can hold less well on leather, so on a hybrid you can make it semi-permanent: put small spots of glue at the corners and center of the adhesive Velcro strip, or lightly sand the spot where the strip goes with very fine-grit sandpaper first. Both change the holster, so check the holster maker’s warranty before you do either.

Can I move it to another holster later?

Yes. Peel it off the hook-and-loop and use a new loop strip on the next holster; extra strips are sold separately.

Related Guides

Cloudster Pillow

Cloudster Pillow makes the Cloudster Pillow, an adjustable-fill holster pillow for IWB and appendix carry. Questions about anything on this page: cloudster@cloudsterpillow.com.